DOWNLOAD NEXUS 1000V 2.1

Enter yes to save the new configuration and to ensure that the kickstart and system images are also automatically configured. Step 4 List the image profiles by entering the following command: Step 17 If you are setting up the secondary or standby VSM, do the following: Config push to VC successful. Setting HA role to secondary will cause a system reboot.

Uploader:	Maule
Date Added:	13 December 2014
File Size:	23.91 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	29574
Price:	Free* [*Free Regsitration Required]

Step 15 Do one of the following: If it is not bundled in the image profile, the VEM does not persist across reboots of the stateless host.

Migrating Virtual Supervisor Modules. The copyrights to certain works contained in this software are owned by other 1000c parties and used and distributed under license. The following configuration will be applied: In the Register Plug-in nexud box, click OK. For details, see one of the following sections: See the vSphere Installation and Setup document.

On your Catalyst series switches with Cisco IOS software, enter the spanning-tree portfast trunk or spanning-tree portfast edge trunk command. The name for the VSM must be unique within the inventory folder and less than 80 characters.

Step 5 Step 6 Open a command window. Switchname nv interface Mgmt0 ip address In the Network Connectivity screen, do the following tasks: This step is required for bundling the VEM into the image profile. Step 17 If you are setting up the secondary or standby VSM, do the following: Connect to vCenter Server by entering the following command: Procedure Step 1 Display the VMware version and build number by entering the following commands: Step 16 Click Next Step 17 Do one of the following: Step 7 In the Ready to Complete screen, click Finish.

The data remaining on the physical device is not erased during creation. Choose the datastore in which to store the file if one is available. Enable the ssh service? Procedure Step 1 Create a virtual service blade.

Installing the Cisco Nexus V Software |

It might take longer to create virtual disks in this format than to create other types of disks. Step 4 Verify that the VIB has installed by entering the following command: Virtual machines do not read stale data from the physical device. Select [Y] if you want to work with more than one default servers.

The Register Plug-In dialog box opens.

Download Cisco Nexus 1000V Virtual Ethernet Module for vSphere 5.1

The uplink should be a trunk port that carries all VLANs that are configured on the host. Step 12 Enter and confirm the Administrator password.

Do not use multiple vmkernel interfaces on the same subnet. Press Ctrl-C to skip the remaining commands.

Upgrading the Cisco Nexus V switch - VSM

Step 15 In the Network Mapping screen, choose the networks the control, management, and packet port groups that are present in your inventory. VMware bundled software updates require placing the host in maintenance mode. The uplink must be a trunk port that carries all the VLANs that are configured on the host.